Grunt Mix Strong


grunt mix strong_2013_GB

Concentrated primer for priming raw building substrates, like concretes, plasters, drywalls, and old previously painted surfaces.

GRUNT MIX Strong is the high quality, deep penetrating primer (undercoat) recommended to prime, before decorating or refreshing painting of: walls, old and new plasters, drywalls, finishing coats, structural plasters, glaze and terracotta. Suitable for indoor and outdoor use. Concentrated liquid – makes 2, 3, 4 ,5 or 6 liters of ready primer, depends on application.

The Grunt MIX Strong priming preparation is intended for priming raw construction surfaces (concrete, cement, cement-lime and gypsum ones) and old, previously painted surfaces, which with the time passing lost their parameters. Ideal for floor heating systems. May be easily applied both indoors and outdoors. Grunt MIX Strong tinted with one of our company’s pigments facilitates even distribution of the preparation. It is suitable for all water-based elevation paints and acrylic plasters tinted with the EKO MIX BUD concentrates, as well as for interior paints.

Priming concentrate for priming concrete, cement, plaster foundations, etc. Penetrates deep into a primed foundation, strengthening it and reducing its absorptivity. Perfect for application beneath paints, adhesives, plaster work, stuccos, screeds, underlayments and floor heating systems. Intended for both indoor and outdoor use. Perfect for application beneath paint coloured with Pigment MIX, EKO MIX or EKO MIX BUD colorants.

Before use, the product should be thinned with water in adequate proportions depending on foundation type and absorptivity. The standard proportion is 1 container (250 ml) of concentrate per 6 liters of water. In case of more absorptive foundations, thin with a smaller amount of water. All thinning proportions depending on foundation types are tabulated on the front of the label.

Priming emulsion should be spread singly over a clean and dry surface with a paintbrush or roller. Apply at a temperature above +5°C. When priming weak or more absorptive foundations, it is recommended to spread a second coat over a first one before drying. Primed surfaces can be used 12 hours after priming.
Apply by roller or brush.

High concentrated primer (undercoat) for:
• old and new plasters
• plasterboard panels
• painted walls
• drywalls
• finishing coats
• structural plasters
• glaze and terracotta

Properties and advantages:
• reduce the usage of paint
• increase final performance
• reduce substrate absorption
• reinforce substrate layer
• increase paint adhesion to substrate
• increase final decoration effect

Recomended thinning proportions.
6 L – new plaster, plasterboard panels
5 L – old palster, plasterboard panels
4 L – finishing coats, structural plasters
3 L – glaze and terracota
2 L – old coming off plasters
L – liters of water for 250 ml of concentrate.

Packaging: 250 ml
Recommended number of layers: 1
Applying: by roller or brush
Shelf life: 18 months (if not opened)

 


 

designed by: tomsky.pl | 2017